+92 300 4297396Inquire on WhatsApp — nationwide delivery
🔥 FREE DELIVERY NATIONWIDE ON ORDERS OVER Rs 50,000 WITH CODE: AMTOOLS
GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool
GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool
1/2

GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool Available in Lahore, Islamabad & across Pakistan

The GOODKING Adjustable 3-Jaw Oil Filter Wrench is designed to provide a strong, balanced grip on compatible spin-on oil filters during removal and installation. Looking for GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool? AM Auto Tools supplies it from Lahore with setup support, delivered to Islamabad, Rawalpindi, Karachi and across Pakistan.

4.5★★★★★★★★★★65 ratings

Price on request

Technical details

BrandGOOD KING TOOLS
ModelGOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool
Key featuresfor auto workshop tool
CategoryMaintenance Tools for Garage

Compare with similar items

GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal ToolThis item
THINKCAR ADAS ELITE Professional ADAS Calibration SystemGoodKing 113-Piece Professional Workshop Tool KitGoodKing 128-Piece Professional Workshop Tool Kit
PricePrice on requestPrice on requestRs 75,000Rs 35,000
Customer rating★★★★★★★★★★ 4.5★★★★★★★★★★ 4.8★★★★★★★★★★ 4.5★★★★★★★★★★ 4.5
Reviews6564230
Part number————
Warranty—1 year——

GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool

GOODKING 3-Jaw Professional Adjustable Oil-Filter Removal Tool

The GOODKING Adjustable 3-Jaw Oil Filter Wrench is designed to provide a strong, balanced grip on compatible spin-on oil filters during removal and installation. Its three adjustable gripping jaws close evenly around the filter body as turning force is applied, helping technicians remove tight, oily or difficult-to-access filters with improved control.

The compact design is especially useful when a conventional strap wrench, chain wrench or large filter plier cannot be operated easily because of limited space around the engine. It can be used with a compatible ratchet, extension or hand tool, allowing the mechanic to reach filters positioned deep inside the engine compartment.

Available from AM Auto Tools, your trusted supplier of automotive maintenance and professional garage tools in Pakistan since 1992.

Key Features

Three-Jaw Secure Grip

Three curved gripping jaws contact the oil filter from multiple sides. This balanced design helps distribute pressure around the filter and reduces unwanted slipping during removal.

Self-Tightening Operation

As turning force is applied in the removal direction, the jaws move inward and grip the filter more firmly. This helps technicians maintain control when working with oily, smooth or tightly installed filters.

Adjustable Design

The movable arms allow the wrench to accommodate a range of compatible spin-on oil-filter diameters. This makes it a practical addition to professional workshops that service different vehicle models.

Compact Access

Its low-profile, open construction helps the tool reach filters installed in crowded engine compartments where space for a conventional wrench may be limited.

Central Drive Connection

The raised centre drive allows the wrench to be operated with a compatible ratchet, extension or hand tool. An extension can provide easier access when the filter is located deeper inside the engine bay.

Heavy-Duty Metal Construction

The tool uses a robust metal body, adjustable arms and secure fasteners for regular workshop servicing. Its black protective finish helps provide a professional appearance and protects the metal surface during storage and normal use.

Balanced Turning Force

The triangular arrangement keeps the jaws positioned around the filter, helping apply rotational force more evenly than a single-contact removal tool.

Product Benefits

Provides a secure three-point grip

Helps remove tight or difficult oil filters

Adjustable for multiple compatible filter diameters

Compact design for restricted working areas

Suitable for use with a compatible ratchet or extension

Provides better control than improvised removal methods

Useful for professional workshops and mobile mechanics

Reusable design for regular vehicle servicing

Easy to clean and store

Reduces direct hand contact with oily filter surfaces

Suitable Applications

The GOODKING Adjustable 3-Jaw Oil Filter Wrench is suitable for removing compatible spin-on oil filters used on many:

Passenger vehicles

SUVs and 4×4 vehicles

Light commercial vehicles

Vans and pickup trucks

Motorcycles with compatible external filters

Agricultural and industrial equipment

Generators and small engines

Workshop machinery

Oil-filter dimensions and access conditions vary between vehicles. Always confirm the filter diameter, available working space and required drive connection before purchasing or using the tool.

How the Tool Works

The three jaws are connected to an adjustable metal body. When rotational force is applied through the centre drive, the jaws close around the filter body. Continued turning increases the gripping pressure and allows the filter to be loosened.

This design is particularly useful when:

The filter surface is oily or slippery

The filter was previously overtightened

The filter is positioned in a recessed area

There is insufficient room for a strap wrench

Additional reach is required through an extension bar

How to Use

Park the vehicle safely on a stable and level surface.

Switch off the engine and allow hot components to cool.

Raise and support the vehicle correctly if access from underneath is required.

Position a suitable drain container below the filter area.

Place the three jaws around the oil filter.

Confirm that all three jaws contact the filter securely.

Connect a compatible ratchet, extension or hand tool to the centre drive.

Turn slowly in the filter-removal direction.

Allow the jaws to tighten evenly around the filter.

Apply controlled pressure until the filter begins to loosen.

Remove the wrench and finish unscrewing the filter carefully by hand.

Clean the filter mounting surface before installing the replacement filter.

Install the new filter according to the vehicle or filter manufacturer’s instructions.

Installation Guidance

A replacement oil filter should normally be installed according to the filter and vehicle manufacturer’s specified procedure. Many filters require the sealing gasket to be lightly lubricated and the filter to be tightened by hand by a specified fraction of a turn after gasket contact.

Avoid overtightening the new filter. Excessive force may damage the filter body, sealing gasket, mounting threads or filter housing. Use this wrench for installation only when permitted by the filter or vehicle manufacturer.

Product Specifications

Brand: GOODKING

Product name: Adjustable 3-Jaw Oil Filter Wrench

Tool type: Self-tightening oil-filter removal wrench

Grip configuration: Three adjustable jaws

Operation: Centre-drive hand-tool operation

Body construction: Heavy-duty metal

Finish: Black protective finish

Adjustment method: Mechanical three-arm gripping design

Recommended use: Compatible spin-on oil filters

User level: Professional mechanic, workshop technician and experienced DIY user

Quantity: 1 tool

The exact filter-diameter range and centre-drive size should be confirmed from the product packaging or by contacting AM Auto Tools before ordering.

Package Contents

1 × GOODKING Adjustable 3-Jaw Oil Filter Wrench

A ratchet, extension, socket, oil filter and other accessories are not included unless specifically stated in the current package offer.

Compatibility Information

This tool is intended for compatible cylindrical spin-on oil filters. It may not be suitable for:

Cartridge-style filter caps

Plastic filter housings

Filters without sufficient external gripping space

Damaged or heavily crushed filter bodies

Filters positioned where the jaws cannot sit evenly

Filters outside the tool’s adjustment range

Before purchasing, compare the tool with the oil filter installed on the vehicle. If uncertain, contact AM Auto Tools with the vehicle make, model, engine and filter information.

Safety Precautions

Allow the engine and exhaust system to cool before beginning work.

Wear suitable gloves and eye protection.

Support raised vehicles with approved lifting equipment and safety stands.

Never work beneath a vehicle supported only by a jack.

Keep hands away from hot exhaust and engine components.

Use a drain pan to collect used engine oil.

Confirm that all three jaws are seated correctly before applying force.

Do not use a hammer or impact tool on the wrench.

Do not use excessive extensions or pipes to increase leverage.

Stop immediately if the tool slips or the filter begins to collapse.

Dispose of used oil and filters according to local environmental regulations.

Care and Maintenance

Clean the wrench after every use and remove all oil, grease, dust and metal particles. Inspect the jaws, slots, fasteners and centre drive for damage or excessive wear.

Apply a small amount of suitable lubricant to the moving contact points when required. Do not allow heavy grease to build up on the gripping surfaces. Store the tool in a clean and dry location to protect it from moisture and corrosion.

Why Buy from AM Auto Tools?

AM Auto Tools is a trusted supplier of automobile diagnostic tools, programming equipment, maintenance tools and garage essentials in Pakistan since 1992. We provide professional workshop solutions for mechanics, service centres, technicians and automotive businesses.

Contact our team for current price, stock availability, product specifications and delivery information.

Available at AM Auto Tools Address: Rimpa Center, Abbot Road, Lahore, Pakistan Website: www.amautotools.com Email: [email protected]

Share:

Customers who viewed this item also viewed